REV. 05092016
INSTALLATION AND CARE GUIDE
www.maykke.com
INSTALLATION AND CARE GUIDE
INSTALLATION (continued)
4
Installing the faucet to the vanity top
Follow the manufacturer's instructions to install the faucet and
drain assembly to the vanity top.
6
□
Place the vanity top (C) with the sink (D) over the
vanity (A).
□
Make sure the wall is straight and there are no gaps
between the wall and vanity top (C).
□
Remove the top (C) and apply a small bead of
silicone compound to the top of the vanity before
the vanity top is set into position.
□
Firmly press the vanity top (C) into position; check
the level and evenness across the front of the vanity
(A), and make sure the vanity top (C) is flush to the
wall.
□
Apply silicone compound to the back and bottom
of the backsplash (B). Firmly press the backsplash
(B) to the vanity top (C) to set into place, then
firmly press the backsplash (B) to the wall.
7
Reconnecting the water supply
□
Reconnect the faucet supply lines to the water
supply and reconnect the p-trap.
□
Install the pop-up drain.
□
Turn on the water supply or the home’s main
water supply and test for leaks.
D
A
C
B
5
Installing the Sink to the top
(If installing Maykke sink)
□
Turn the vanity top (C) upside down and unscrew
the bolts attaching the preinstalled sink (D) to the
top (C).
□
Apply a small bead of silicone compound around
the sink cut out on the vanity top (C), reposition the
sink (D) on the top (C), pressing firmly together.
□
Secure the sink (D) to the top (C) with the screws.
4
Securing the vanity top
(If installing Maykke vanity top)
(see fig 5)
Fig 5
