Instruction Manual
5
LED & switch instructions
SYNC button and LED 0
For the initial sync,
press the
SYNC
button on the Wireless Sensor DolphinBar itself
and on the bottom of your controller
. You’ll find that the four blue LEDs found in the
controller and the LED 0 found in the Wireless Sensor DolphinBar will flash quickly. Once
the sync process is complete, the LED on the Wireless Sensor DolphinBar and your controller
will stay lit.
LED 0 communicates the connection status in three ways
:
LED 0
flashes slowly
.
Unable to connect to the Wii Remote controller.
LED 0
stays lit
.
Wii Remote connected successfully to the Wireless Sensor DolphinBar.
LED 0
flashes quickly
.
The Wireless Sensor DolphinBar is looking for Wii Remotes to pair.
