Mayer TR 4103, Instruction Manual

Page: 57 / 70

57
8 Maintenance
In order to avoid personal injuries, damage to the
machine or to other properties as well as
environmental damage while maintenance work is
being performed on the machine, the following
instructions must be strictly observed.

All cleaning, lubrication and servicing work
must be performed on the machine by
qualified and authorized personnel only,
under the strictest observation of all relevant
instructions.

Work on the electrical units of the machine is
only to be performed by technicians specifically
trained and qualified for this purpose.

All power supplies must be turned off and
secured against inadvertently being turned on
again during maintenance work.

All pressure units must be depressurized.

All intervention affecting the control software of
the machine must exclusively be performed by
MAYER GmbH & Co. KG.

All fuels, lubricants and auxiliary materials that
are not re-used must be disposed off in line with
the relevant environmental safety regulations.

Please consult the chapter on h ealth and safety
instructions as well.
Maintenance and servicing of the machine is
associated with the following specific types of
hazards.

Building in faulty components or counterfeit
spare or wear parts can cause severe damage
to the machine.

An inadvertent turning on of the power supplies
while servicing the machine can cause severe
personal injuries or damage to the machine.

Accessible sharp-edged machine parts or tools
can cause severe personal injuries.

Spilt lubricants or fertilizers, when coming into
direct contact with the skin, can cause irritation.

In unsecured manual operation mode the risk of
injuries to persons due to the squeezing or
crushing of body parts is considerably
increased.