Mayer EM 6012 Operating Instructions Manual Download Page 3

Page: 3 / 44

1 Product description

1. Intended use

The MAYER Soil mixer EM 6012 may be used for precise

mixing of different soils in the shortest possible time to meet

your requirements and in accordance with your experience.

Other means of use of the machine, besides the ones listed

here, are not permitted – and they are not the usage for

intended purpose.

If the MAYER Soil mixer EM 6012 is not used in accordance

with the regulations, the safe operation of the machine is not

guaranteed.

The usage for intended purpose involves the reading of the

operating instructions, and the compliance of the regulations,

specially safety regulations stated in it. Furthermore, every

inspection and maintenance should be performed in specified

time.

For damages that are originated from the usage for not the

intended purpose, neither the manufacturer, nor the operator of

the MAYER Soil mixer EM 6012 takes responsibility.

Summary of Contents for EM 6012













































Search results

Summary of Contents for EM 6012

Reviews:

Related manuals for EM 6012

Brands by name

Popular brands

Mayer EM 6012, Operating Instructions Manual

Search results

Summary of Contents for EM 6012

Reviews:

Related manuals for EM 6012

Brands by name

Popular brands