Maycom EH-465, User Manual

Page: 11 / 24

11
This feature allows the user to call all 14 FRS channels for
activity. To start Down(
…
) scanning, press channel
Down(
…
) button over 2 seconds.
The radio will be stop on any busy channel until the preset
Scan delay time expires, then revert to scanning. The user
can cancel scanning by pressing the “PTT” while the radio
stops at a busy channel, and communicate with other users
using that channel. To activate Up(
″
) scanning, press
Up(
″
) channel button during down(
…
) scanning.
4) Melody Call Feature
The user can transmit two melody tones provided in the
radio to indicate its identify test audio performance of the
radio.
To operate, simply press “
…
(or
″
)” button while holding
down the “PTT”
NOTE : FCC restrict the transmission of audible tones to
less than 15 seconds.
5) Tone On/Off
Press the “TONE” button while in the receiving mode to
toggle the Tone Squelch ON and OFF.
“TONE” icon will appear on the LCD when Tone Squelch is
switched ON.
•
To De-Activate : Press “TONE” button one more time. The
“TONE” icon will disappear on the LCD.
NOTE : In Tone Squelch operation, the loudspeaker of the
receiver will only become a active while the
received signal has the same CTCSS code as the
one selected in the RX CTCSS Tone setting menu.
Although you could not hear interference or
transmissions from other users, they could still
exist
and may reduce your communication range. It is a
good practice to monitor the channel press the
“LAMP” button over 2 seconds, to ensure that it is
free of interference before you choose it for