MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 237 / 319

237
Audio – Rear Cabin
Radio operation
Ending Scan search manually
Select item
Scan
using the selection
wheel on the remote control and
press the selection wheel to confirm.
Manual tuning
Switch to the desired waveband
(
page 234).
Press

or

on the remote
control to scroll up or down. Press
and hold the key for at least 2 sec-
onds.
Manual tuning is activated.
Keep the key on the remote control
pressed or release it and keep tap-
ping it in quick succession.
The frequency will change by the tun-
ing increments for the respective
waveband each time the key is
pressed or for as long as the key is
pressed and held.
Manual tuning is deactivated if the
key is not pressed for approx. 3 sec-
onds.
Tuning via direct frequency input
Entry example:
98.5 MHz in FM waveband
Switch to the FM waveband
(
page 234).
Press

on the remote control.
The frequency input display appears.
The frequency range of the FM wave-
band is shown.
i
FM waveband:
tuning increments 0.2 MHz
AM waveband:
tuning increments 10 kHz
Manual tuning is also possible in all
wavebands by pressing

or

.
The frequency changes by the tuning
increments for the respective wave-
band each time one of the keys is
pressed.
i
Frequency increments for manual
tuning:
FM 0.2 MHz
AM 10 kHz
WB 0.025 MHz