Maxxus RunMaxx 7.4 T Installation & Operating Manual Download Page 29

Page: 29 / 44

ENG

Cockpit

Audio Playback

There are two options on this device which enable you to play back an audio source over the integrated loudspeakers in the cockpit.

1. Connect an External Audio Source via the MP3 RCA Connection

You can connect an external audio source (MP3 player, smartphone etc.) to the training device via the RCA connection located on the

front of the cockpit, using the audio cable supplied (3.5 mm jack plug). The prerequisite for this is that the external audio source has

a suitable connector for this cable. Once the external music source is connected and the playback on the external source has been

started the music, audio book, etc. will be played over the loudspeakers.

ATTENTION:

With this type of audio playback, the controls (volume control, start, pause, etc.) are exclusively via the external audio source, such as

the smartphone. Control via the cockpit is not possible!

2. Connect a USB Stick Containing Audio Files to the USB Port

USB sticks up to and including USB 2.0 can be connected directly to the training device via the USB connection. The following file

formats are supported: MP3 and APE.

After you have inserted the USB stick containing the MP3 audio files, press either the Music (Note Icon) or Video (Film roll Icon). These

two icons will be shown alternately in the display.

Now select the “Music” to show all the existing audio files.

Key to play or pause the music files

Key to skip-forwards or backwards to the next Song title.

Keys to adjust the volume

ATTENTION:

It is not possible to play an audio file from a Smartphone or Tablet PC via Bluetooth.

Playing Back a Video File via USB

USB sticks up to and including USB 2.0 can be connected directly to the training device via the USB connection. The following file

formats are supported: MP4 and MOV.

After you have inserted the USB stick containing the video files, press either the Music (Note Icon) or Video (Film roll Icon). These two

icons will be shown alternately in the display.

Now select the “Video” key to show all the existing video files

Key to play or pause the video files.

Keys to adjust the volume.

ATTENTION:

It is not possible to play a video file from a Smartphone or Tablet PC via Bluetooth.

Summary of Contents for RunMaxx 7.4 T













































Search results

Summary of Contents for RunMaxx 7.4 T

Reviews:

Related manuals for RunMaxx 7.4 T

Brands by name

Popular brands

Maxxus RunMaxx 7.4 T, Installation & Operating Manual

Search results

Summary of Contents for RunMaxx 7.4 T

Reviews:

Related manuals for RunMaxx 7.4 T

Brands by name

Popular brands