Program P7
Program P8
Program P9
Program P10
Program P11
Program P12
Cockpit
Own training profile (USER U01 - U04)
Step 1: Programme selection
After you have started pedalling and the instrument panel has switched on, "P00" appears in the RPM window. PRESS
START FOR QUICKSTART OR MODE FOR SETUP" appears in the lower display.
Now press the PROGRAM button repeatedly until the desired free memory location U01 to U04 is displayed in the RPM
window. Now "PRESS START FOR QUICKSTART OR MODE FOR SETUP" appears again in the lower display.
Press the MODE button.
Step 2: Entering the user age
The lower display shows "USE LEVEL +/- KEYS TO ADJUST AGE". Then "AGE > 35" appears.
Now enter your age with the +/- keys.
Then press the MODE button.
Step 3: Entering the user weight
USE LEVEL +/- KEYS TO ADJUST WEIGHT" appears in the lower display. Then "WEIGHT > 70" appears.
Now enter your weight with the +/- keys.
Then press the MODE button.
Step 4: Entering the training time
USE LEVEL +/- KEYS TO ADJUST TIME" appears in the lower display. The value "10:00" flashes in the TIME window.
Now enter the desired training time with the +/- keys.
Then press the MODE button.
Step 5: Segment setting
The first segment of the training profile flashes. Enter the desired braking level from level 1 to 20 for this segment by
pressing the +/- buttons. Confirm your entry by pressing the MODE button.
Now the second segment flashes. The training profile consists of 24 segments.
Edit all segments in the same way as described for segment 1.
Step 5: Start training
PRESS START TO BEGIN OR MODE TO MODIFY" appears in the lower display.
Press the START/STOP button to start the training.
Use the +/- buttons to change the load level during the training.
The training ends automatically when the set training target is reached.
The cockpit saves the created training profile, the user data and the preset training time.
To complete the profile again, select it as described in step 1 and then press the START button directly.
18
