1. A 5/8” diameter steel hitch pin and match-
ing R-Shaped Safety Clip (both included)
are needed to secure the Adjustable Ball
Mount’s shank to the tow vehicle’s receiver
- see illustration below.
2. To gain the required rise/drop needed,
the front hitch ball bracket can be inserted
up and into the shank bracket, or reversed
and attached from the top side of the shank
bracket - see photo below.
Model 70067 70068 Page 4
Setting Up the Adjustable Ball Mount
Hitch Pin
R-Shaped Safety Clip
Adjustable
Ball Mount Shank
Always wear ANSI approved
safety goggles.
MAXXTOW is not responsible for the at-
tachment or the installation of this prod-
uct. The attachment of this product is
critical and beyond the control of MAXX-
TOW Towing Products. It neither guar-
antees, nor will it be liable for any dam-
age resulting from the Adjustable Ball
Mount’s attachment or improper use.
Limited Warranty.
MAXXTOW warrants
to the original retail purchaser that the
product is free of defects in material and
workmanship at the time of shipment. This
product is warranteed for 90 days from
the date of purchase. This warranty is
expressly in lieu of all other warranties,
express or implied. Proof of purchase is
required for warranty transactions;; a copy
of the original invoice or sales receipt is
required.
Always use the included Pins with R-Shaped
Safety Clips to secure the Hitch Ball and
Shank Bracket together. The R-Shaped
Safety Clips must be fully engaged.
3. Only use an appropriate sized hitch ball
(1” shaft diameter) with this Ball Mount.
Read and adhere to all instructions and
safety warnings provided by the manufac-
turer of the hitch ball being used.
4. Read and adhere to all safety warnings
and instructions provided by the manufac-
turer of the hitch ball, and the trailer being
connected to the Adjustable Ball Mount.
5. Do not exceed the maximum weight rat-
LQJVVKRZQLQWKHVSHFL¿FDWLRQFKDUWRQ
cover page of this manual.
Model 70068 shown
Hitch Ball Bracket
Shank Bracket
