1. A steel hitch pin and matching R-Shaped
Safety Clip (both not included) are needed
to secure the Hitch Adapter’s shank to the
tow vehicle’s receiver hitch - see illustration
below. See hitch pin specifications on Speci
-
fication chart on cover page of this manual.
2. The shank of the accessory to be at-
tached must be secured to the Hitch Adapter
with a hitch pin and R-Shaped safety clip as
described above. Hitch pins and safety clips
are not included. Make sure safety clips are
always fully engaged.
3. Read and adhere to all safety warnings
and instructions provided by the manufac-
turer of the receiver hitch and the accessory
being attached.
4. Do not exceed the maximum hitch capac-
ity and the maximum tongue weight shown
in the specification chart and warnings on
cover page of this manual.
Model 70032, 70033 Page 4
Setting Up the Hitch Adapter
Hitch Pin
R-Shaped Safety Clip
Hitch Adapter
Shank
Always wear ANSI approved
safety goggles.
Manufactured and Distributed by:
MAXXTOW Towing Products, 1270 Avenida Acaso STE E, Camarillo, CA 93012
Tel: 805-987-1333 Fax: 805-603-1355 www.maxxtow.com
MAXXTOW Towing Products ensures complete satisfaction with this product. In the event of missing
or damaged parts please call toll free, Customer service hours 9:00-5:00, Monday-Friday, PST., 1-855-MAXX-TOW