EN
14
• Place the device on a dry, fl at and sol-
id surface. If the device is used on a
carpet, make sure that the ventilation
openings on the bottom of the device
remain clear.
Protect sensitive fl oor coverings
on which the device is placed
with a mat if necessary.
• Make sure that the silicone pads (
2
)
are attached correctly.
• First connect the connecting cable to
the connecting socket (
5
) of the de-
vice and then to a properly installed,
easily accessible plug socket. The
control lamp in the mains adapt-
er lights up. The displays (
8, 12
) on
the control panel (
1
) light up and a
beep is heard. The device is ready.
PROGRAMMES
P1 – Vibration
Vibration level: 1 – 15 (adjustable)
Duration: 1 – 10 minutes (adjustable)
P2 – Vibration and massage
Vibration level: 1 – 15 (adjustable)
Duration: 1 – 10 minutes (adjustable)
P3 – Automatic programme
alternates
between 1 minute of vibration and 1
minute of vibration and massage. The
vibration level is adjusted automatically.
Duration: 10 minutes
USE
Please Note!
■
A tingling sensation / itching during
or after the massage is normal due to
the circulation-boosting effect.
■
Never place your hands and feet be-
tween the frame and vibrating plate/
massage heads while the device is
in operation. There is a danger of
crushing!
■
Do not stand, kneel, stamp or jump
on the vibrating plates / massage
heads to prevent injuries and damage
to the device.
■
Do not use the device for longer than
15 minutes without a break.
Start with the slowest vibration
level and gradually increase the
level of intensity.
The device can be controlled both with
and without the remote control. To make
it easier to operate, we recommend using
the remote control. It must be directed
towards the receiver (
10
) of the device.
1. Switch on the device using the
but-
ton (
6
or
19
) on the control panel (
1
) or
the remote control.
2. The device can be used either while
sitting or lying down:
○
Sitting down: Sit down on a chair,
armchair or similar place in front of
the device. Place your feet (without
shoes on) on the vibrating plates (
4
).
○
Lying down: Lie down in front of
the device in such a way that your
calves can be placed on the vibrat-
ing plates.
3. Select the programme you want
(see the “Programmes” chapter) by
pressing the button
P
(
7
or
21
) on the
control panel or the remote control
several times.
