www.elinz.com.au / [email protected] / 1300 881 773
How to Jump Start a Vehicle
Make sure it is over 60% charged. If you have not used the product for more
than two months, please charge it first.
1. Connect the smart cable plug to the jump starter
2. Connect the red clamp to the positive "+" and the black clamp to negative
"-" terminal on your vehicle's battery.
3. Start the vehicle
4. Disconnect clamps immediately from the battery after starting vehicle.
DO NOT crank the engine for more than 4 continues seconds while the
unit is connected to the battery.
If the engine fails to crank or start, there may be a problem other than
a discharged battery.
