- 4 -
22048
EN
PARTS AND ACCESSORIES
1.
On/off switch
2.
Electrical outlet
3.
Handle
4.
Power cord hook
5.
Blower port
6.
Top cover
7.
Suction port
8.
Hose
9.
Caster supports (x4)
10.
Drain port
11.
Top cover latch
12.
Suction power switch
13.
Upper extension tube
14.
Lower extension tube
15.
Combi nozzle
16.
Tank
17.
Curved hose
18.
Floor brush
19.
Cloth filter
20.
Sponge filter
OPERATION
Caution:
Always remove the power plug from the wall outlet before assembling or removing accessories.
1.
Before use, put the tank upside down. Align the caster supports at their positions, using the provided screws
to tighten the caster supports.
2.
The appliance has both suction function and blower function. To use the suction function, fit the hose into
the suction port (position ①) by aligning the bulge and groove and turning it clockwise; to use the blower
function, fit the hose into the blower port (position ②) by aligning the bulge and groove and turning it
clockwise.
3.
Attach the extension tube(s) to the curved hose.
4.
Fit the floor brush or combi nozzle to the other end of the extension tube.
5.
For wet pick-up, please open the top cover and take out the cloth filter first.
6.
Check and make sure the drain port has its cover in place properly.
7.
Unwind the power cord and insert the power plug into an appropriate power outlet.
Summary of Contents for 22048
Page 1: ......