REMOTE CONTROL OPERATING GUIDE
WIRELESS REMOTE CONTROL FOR
MAXXFAN
®
Plus
MODELS: 4500KI • 4540KI
FAN ON & POWER OFF
-
Press this button:
•
To start the fan
•
To turn the fan off
•
To exit Auto Mode
VENT LID POSITION
-
Press this button to open or close the vent lid
•
While the fan is running in Manual Mode press once to close the vent lid
and enter “Ceiling Fan” Mode.
NOTE:
This button is not active in Auto Mode. If the fan loses 12volt Caravan
power or power is removed from the fan, use the knob located at the ceiling to
manually open or close the vent lid if desired.
AIR EXHAUST / INTAKE
-
Press this button to reverse the fan from
intake or exhaust
NOTE:
In Auto Mode, the fan direction is automatically positioned to Exhaust,
but may be overridden and changed to Intake by depressing this key.
FAN AUTO MODE
-
Press this button to enter Auto Mode
•
Auto Mode allows the fan lid to automatically open and the fan motor to
operate as dictated by the thermostat set point temperature. Once the
cabin temperature cools and reaches the set point temperature, the fan lid
will close and the fan motor will shut off.
•
Pressing this button while in Auto Mode will shut off Auto Mode, close the vent
lid and shut off the fan motor.
THERMOSTAT SET TEMPERATURE
TEMP +
~ Press this button to increase the Set Temperature for Auto Mode.
TEMP -
~ Press this button to decrease the Set Temperature for Auto Mode.
NOTE:
The thermostat temperature range is from -2°C to 37°C. To change
from Celsius to Fahrenheit on the temperature display, press and hold both set
temperature keys simultaneously.
FAN SPEED
Fan Speed +
~ Press this button to increase the fan speed.
Fan Speed -
~ Press this button to decrease the fan speed. The fan has ten speeds.
NOTE:
When the fan speed reaches either the maximum or minimum speed, the fan will respond with 2
quick beep sounds to indicate this.
LOW BATTERY INDICATOR
•
When the battery is at full charge, three black power bars are displayed.
•
One or zero power bars displayed indicates the batteries need replacement.
TRANSMISSION SIGNAL
•
This symbol is
displayed on the
screen when any
button is pressed to
indicate the signal
was transmitted to
the fan.
•
A beeping sound
from the ceiling unit
indicates the signal
from the remote
control was received
by the fan.
SET
TEMPERATURE
TRANSMIT
LOW BATTERY
INDICATOR
AIR DIRECTION
INDICATOR
CEILING FAN MODE
FAN SPEED
VENT LID
POSITION
FAN OFF
INDICATOR
VENT LID IN
AUTO MODE
FAN ON
INDICATOR
ROOM
TEMPERATURE
AUTO MODE
INDICATOR
ON/OFF
VENT
OPN/CLS
AIR
IN/OUT
AUTO
ON/OFF
TEMP+
TEMP-
SPEED+
SPEED-
Remove protective
film from Display
Screen
“More information https://www.caravansplus.com.au"
