WARNING DANGER
Never perform maintenance or assembly procedures with engine running or serious
personal injury may result.
1.Assemble straight pipe with swivel
（
D
）
flexible pipe
(
C).
2.Assemble flexible pipe(C)to elbow(A)on blo
wer.
3.Assemble clamps(B)onto both ends of flexibl
e
pipe(C)and tighten.
4.Loosen wing nut(I
)
completely and expand open, stick handle clamp(J).
5.Align notches
(H)
in handle clamp with. pipe pegs
(
G)stic
k
handle should be angled away from
operator.
6.Slide stick handle onto pipe with swivel(D).
7.Position stick handle for comfortable operatio
n
and tighten wing nut(I).
8.Assemble straight
pipe(
E)to pipe with swiv
el(D),
turning straight pipe counter-cloc
k
wise to loc
k
in
place.
9.Assemble straight pipe(F)to straight pipe(E)tu
rning.
10. The way of installing is shown as diagram below. The accelerator controller is putted in spraying
a tube
Install Blower Pipes /Stick Handle
-10-
