Service and Installation Manual
6
SPECIFICATIONS
MODEL#
V/Hz/Ph
STORAGE
CAPACITY
Cu-ft
CAPACITY
(13”x13”x11”
Crates)
CAPACITY
(19”x13”x11”
Crates)
AMP
DRAW
HP
CHARGE
OZ
REFRIGERANT
NEMA
PLUG
MXMC34HC 115/60/1
13.2
8
4
4
1/4
3.17
R290A
5-15P
MXMC49HC 115/60/1
19.6
12
8
7.5
1/4
3.17
R290A
5-15P
MXMC58HC 115/60/1
23.5
16
10
7.5
1/3
3.17
R290A
5-15P
CONGRATULATIONS ON YOUR NEW COOLER
Note these instructions apply to all milk coolers. Installation of equipment may not exactly correspond to
your model.
INSTALLATION
1. AIR CIRCULATION
-The cooler should be placed in a warm, dry room, with suitable ventilation.
Please make sure to avoid any
partition or objects that may stop the air flow. Please make sure there is enough space for air circulation to
the rear of the unit. Recommended space between the rear of the unit to the wall is at least 5 inches.
2. FOUNDATION
-
Please make sure that the floor where the unit will be placed can support the total weight plus any other
contents that it may hold.
3. DO NOT PLACE NEAR HEAT
- Please make sure to avoid hot corners and locations near stoves.
- High ambient temperature will significantly reduce cooling efficiency.
4. INDOOR USAGE ONLY
- This unit is designed and tested for indoor use only.
Never place the cooler in strong sunlight.
- Outdoor usage will void its warranty.
5. LEVELING
- Please make sure that the unit is level from the front to the back and side to side before placing it in service
6. STABILITY
-
The cooler should always be placed on a stable surface with all casters level and the brakes set when in
use or it’s being stored in an accessible location
