Maxx Cold MXM1-2.5F, Service, Installation And Care Manual

Page: 8 / 16

Service and Installation Manual
8
MAINTENANCE
Swing Door Replacement and Adjustment
1. Open the bottom panel and hold the door. Then loosen the bottom hinge screw and take off the old door.
2. Prepare new door; insert top pin into top hinge, get one bottom hinge to hold the door with the bottom pin.
Fasten bottom hinge securely to the door frame with three screws.
3. Allow the door to freely swing, making sure it swings closed by itself with no restriction.
4. Plug the unit in and make sure the lock works well.
5. If not, adjust the door height by adding the plastic spacer/washer provided with the bottom hinge pin.
Remove the bottom panel
Loosen and remove the top screws, slide the panel up and out
Light Bulb Replacement
1. Upper light bulb replacement: Loosen the screws in the bottom of the top panel and swing the panel up until
the light bulb is exposed. Light bulb can then be changed.
2. LED light bulb replacement: Take the cover off to replace the LED light bulb.