Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728 1-800-433-1626 Fax: 940.325.9311 www.BVC.com
2
2
VENTAMATIC, LTD
. • 100 WASHINGTON AVE MINERAL WELLS, TX 76067 • PHONE 800
-433-
1626 • WWW.BVC
.COM
READ AND SAVE THESE INSTRuCTIONS.
ASSEMBLY AND OPERATING INSTRuCTIONS
CAuTION:
Read and follow all instructions before operating fan.
Do not use fan if any part is damaged or missing.
WARNING:
To reduce the risk of fire or electrical shock, do not expose to water or rain.
To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device.
This appliance has a 3-prong plug. To reduce the risk of electrical shock, this plug is intended to fit in an outlet only one way.
If this does not fit the outlet, contact a qualified electrician. Do not attempt to bypass this procedure.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to
avoid a hazard.
RuLES FOR SAFE OPERATION:
Never insert fingers or any other objects through the grille guard when fan is in operation.
Disconnect the fan when moving from one location to another.
Disconnect the fan when removing guards for cleaning.
Be sure fan is on a stable, flat surface when in operation.
DO NOT
use fan in windows. Rain and moisture may create electrical hazard.
CAuTION:
Do not alter t
he Fan’s assembly.
WARNING:
Be sure
FRONT
and
REAR
GuARD
screw are completely screwed down in locking position before operation.
OPERATING INSTRuCTIONS
BASE ASSEMBLY:
1. Align one washer assembly with pre-drilled hole on side of
fan housing.
2. Place base arm against washer assembly, aligning base hole
with washer assembly hole.
3. Insert knob and tilt nut assembly through base hole and into
washer, turning clockwise until tight.
4. Repeat for other side.
How To Adjust Tilt
1. Use knob to loosen tilt nut by turning counter-clockwise.
2. Adjust fan head to tilt you want.
3. Tighten the tilt nut by turning clockwise.
SPEED CONTROL
:
Rotate SWITCH to LOW (1), MEDIUM (2) AND HIGH (3) speeds for respective air velocity. It is normal
for the motor to feel warm to touch after continuous operation. This fan features a thermal cutoff that will automatically shut off
should it overheat for any reason. If this happens, immediately unplug the fan from the outlet.
Knob
Washer
CAUTION
WARNING
CAUTION
WARNING
CAUTION:
Do not alter the Fan’s assembly.
WARNING:
Be sure FRONT and REAR GUARD screw are completely screwed down in locking
position before operation.
How to Adjust Tilt: