Maxwell MW-2312 GY, Manual Instruction

Page: 9 / 20

ENGLISH
9
block the air inlets during unit operation and
avoid getting of hair into its air inlet.
CLEANING AND CARE
The нot air brush is intended for household
use only.
•
Set the switch (3) to the « 0 » position, dis-
connect the hot air brush from the mains
and let it cool down.
•
To remove the attachment, press the
attachment release button (1) and turn the
attachment counterclockwise.
•
Wipe the unit body (5) with a damp cloth and
then wipe it dry.
•
Clean the air inlet grid (6) with a brush.
•
Never immerse the unit into water or other
liquids.
•
Do not use abrasives and solvents to clean
the unit body.
STORAGE
•
Disconnect the unit from the mains and
clean it.
•
Never wind the power cord around the hot
air brush, as this can damage the cord or
the unit body. Handle the power cord with
care, do not pull, twist or stretch it, espe-
cially near the power plug or at the junc-
tion point. Straighten the cord periodically
if it gets twisted during the hot air brush
operation.
•
Use the pouch (11) for storage of the unit
and the attachments.
•
Keep the unit away from children in a dry
cool place.
DELIVERY SET
Hot air brush – 1 pc.
Round brush – 1 pc.
Brush – 1 pc.
Concentrator nozzle – 1 pc.
Pouch – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 230 V ~ 50/60 Hz
Power consumption: 800-1000 W
The manufacturer preserves the right
to change the specifications of the units with-
out a preliminary notification
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim
under the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 2004/108/ЕС
and to the Low Voltage Regulation
(2006/95/ЕС)
IM MW-2312.indd 9 09.12.2016 11:53:26