Maxwell MW-1151, Manual Instruction

Page: 12 / 36

12
ENGLISH
•
To avoid damages, transport the unit in the original
package only.
•
Keep the unit out of reach of children and people
with disabilities.
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY,
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.
BEFORE USING THE UNIT
After unit transportation or storage at low tempera-
ture keep it for at least three hours at room tempera-
ture before switching on.
•
Take the blender out of the package and remove the
packaging materials.
•
Check the unit for damages, do not use it in case of
damages.
•
Before switching the unit on, make sure that the
mains voltage corresponds to the voltage specified
on the unit body.
•
The unit is intended for operation from an AC power
network with the frequency of 50 or 60 Hz. The unit
does not need any additional settings for operating
with the required rated frequency.
•
Before using the unit, wash the attachment (1) with
warm water and a neutral detergent, then rinse and
dry thoroughly.
•
Clean the motor unit (2) with a soft, slightly damp
cloth and then wipe it dry.
ATTENTION!
• Do not immerse the motor unit (2), the power cord
and the plug into water or any other liquids.
•
Wash only the operating part of the blender attach-
ment (1), clean the outer surface with a damp cloth.
Never immerse the blender attachment (1) into water
or any other liquids completely.
•
Do not wash the attachment (1) in a dishwashing
machine.
Operation time
The blender set allows quick and effective operation,
but the continuous operation time should not exceed
IM MW-1151_70х130.indd 12 17.04.2019 15:39:05