4. During testing, select button can be pressed for
switch single-tone or dual-tone.
Network wire finding function
5. Directly insert network wire with RJ45 plug into the
RJ45 socket of the wire tracker’s emitter;
6. Set function switch of emitter to position of
“SCAN” then wire finding indicator “STATUS” flashes
meaning normal work of emitter;
7. Press and hold test button of Receiver, use the
probe of receiver to find target wire at the other
end;
8. During testing, select button can be pressed for
switch single-tone or dual-tone. Ideal for cable
management in rack cabinets
DC level testing function
Set function switch on emitter to position of “SCAN”,
and long press select button on emitter for at least 2
seconds, “STATUS” indicator will turn off and “VERIFY”
indicator flashes, insert the plug with crocodile clamp
into RJ11clamp the two ends to be tested with crocodile
clamps, in case that “STATUS” indicator lights up in red,
it means the end clamped with red clamp is positive
pole, in case that “STATUS” indicator lights up in green,
it means the end clamped with red clamp is negative
pole, electric level can be judged by brightness of the
status indicators; the lighter the indicator, the smaller
the resistance; the darker the indicator, the bigger the
resistance.
Low battery alarm function
Set function switch on emitter to position of “TEST”, in
case that battery level is lower than 7 V, “STATUS” and
VERIFY” indicators will light up at the same time, it
means battery replacement is needed.
Earphone function
In noisy environment, earphone can be used to prevent
interference from the outside.
Spotlight function
You can easily work as usual while putting on the light
switch at night and in the dark.
Functions
Telephone wire finding
Network wire finding
Electric wire finding
Network wire sequence
Open or short circuit
testing
DC level testing
Low voltage alarm
Earphone(Accessory)
Spotlight
Volume adjusting
Specification
Name
Wire tracker
Power supply
9 V 6F22
The max working current
Emitter: ≤ 9 mA
Receiver: ≤ 28 mA
Signal transmission
format
Multi-frequency impulse
Signal output electric
status
8VP-P
Distance of signal
transmission
≤ 3 km
Emitter size
125 x 46 x 25 mm
Receiver size
173 x 36 x 23 mm
