Maxview VuQube II MXL023G, Owner'S Manual

Page: 10 / 19

C. When desired mode is displayed, press and hold button for about 3 seconds until the
LED begins to flash the desired satelliet colour. The antenna is now ready to scan (go to page 8).
Blue
ASTRA 1 (Alarm disabled)
Green
ASTRA 2 (Alarm disabled)
Yellow
ASTRA 3 (Alarm disabled)
WHEN ALARM IS ENABLED - The power inserter alarm will sound when the coax is disconnected from the
antenna unit or from the “antenna” side of the power inserter. To stop the alarm, reconnect the coax or
press the power inserter button.
Time Out Function: If you do not press the button for one minute, the Power Inserter will go back to
flashing (ready to scan) and whatever configuration was currently displayed on the LED will be saved.
Purple
HOTBIRD (Alarm disabled)
Blue
ASTRA 1 (Alarm enabled)
Green
ASTRA 2 (Alarm enabled)
Yellow
Purple
HOTBIRD (Alarm enabled)
ASTRA 3 (Alarm enabled)
Purple Purple Purple Off
Yellow Yellow Off
Green Off
Off
White White
White
White
White White White
White White
White
Off
Off
Off
Off
Green
Yellow
Off
Yellow
Off
Purple Off Purple Off Purple Off
10
Turning the alarm feature on or off
Off
Pattern repeats
Pattern repeats
Pattern repeats
Pattern repeats
Pattern repeats
Pattern repeats
Pattern repeats
Pattern repeats
A. To change settings, press and hold the power inserter button for 6 seconds (6
flashes of the LED light).
One of the options below will appear.
B. Press and release button to choose desired settings.
Alarm Feature
This unit has a built in alarm feature if the coaxial cable is disconnected from the unit.
This unit is shipped from the factory with the alarm feature off