Page 14
Reception Reference Map:
Skew adjustment:
The LNB Skew has been set at a factory default position as per image below. This is optimised for the
Optus D1 satellite and will allow good signal strength all over New Zealand.
Skew adjustment is only required when signal strength is weak at the limit of given satellites’ reception area.
It involves adjusting the angle of the LNB on the roof mounted antenna unit once you have found the signal.
Adjust until you find the strongest signal.
Caution:
Follow general safety advice on page 3 when adjusting Antenna Unit.
12 o’clock
3’o clock
6 o’clock
9 o’clock
Approximately
8 o’clock
Default LNB position.
Summary of Contents for MXL028/65NZ
Page 23: ...Notes Page 23...
