background image

12

13

6. Screw the crown back to its original position

    (see SCREW DOWN CROWN INSTRUCTIONS)

Note: The date changes automatically every 24 hours
Note: No backward hand or date adjustments should be 

made with analogue hands between 8pm and 3am. At 

these times, the gears are too close together and such a 

change could cause damage.

HANDLING OF WATER RESISTANT WATCHES

Water resistancy of your watch is greatly affected by  

the way the watch is treated – misuse will diminish water 

resistancy by affecting the case and lens seals
- Although the watch is warranted to the specifications 

marked, all care should be taken to avoid damage that 

results from mishandling
- Should your watch have a screw down crown, you must 

ensure that the screw lock crown is completely tightened 

at all times

- If the watch comes into contact with salt or chlorinated 

water, be sure to rinse it thoroughly in fresh water 
- If a watch is wet, do not store it in a closed container. 

It should be dried out immediately to avoid damage to 

internal components
- Should water or condensation appear in the watch, 

immediately have it serviced by those listed on your 

warranty as water can corrode components

Summary of Contents for Waverider












Reviews: