40
Chapter 7: Deck Equipment
Cleats & Tow Eyes
Read the section on towing in the Cruiser & Yacht Owner’s Manual before:
•
Towing anything behind the boat.
•
Being towed by another vessel.
Windlass (If Equipped)
•
Read and follow the manufacturer’s instruction manual before using the anchor windlass for the first time.
•
The windlass can be controlled from a switch at the helm or from the deck foot switches.
•
Make sure that the windlass circuit breaker is turned On before using the anchor windlass.
•
To raise the anchor, use engine power (not the windlass) to move your boat to, and directly above, the anchor.
•
Dislodge the anchor from the bottom by pulling it straight up with the windlass.
•
Make sure the anchor is secured before getting underway.
PERSONAL INJURY and/or PRODUCT or PROPERTY DAMAGE HAZARD!
NEVER lift the boat using the bow and stern eyes or the cleats.
WARN I NG!
!
DA NGER
PERSONAL SAFETY HAZARD!
•
ALWAYS secure the anchor and other loose objects BEFORE getting underway.
•
The anchor and other items that are NOT properly secured can come loose when your boat
is moving and cause personal injury or death.
DANGER !
!
PRODUCT DAMAGE HAZARD!
Do NOT pull your boat to the anchor using the windlass or continue to run the windlass if it has
stalled or is overloaded.
CAUTI ON
!
Summary of Contents for 2400 SE Sport Cruiser
