Maxum 1750SR, Owner'S Manual

Page: 39 / 60

33
Chapter 10: Conver tible Seats, Beds, & Tables
Sleeper Seats (If Equipped)
•
The sleeper seats can be adjusted fore and aft in the upright, operating position.
•
The seat bottoms adjust into backrests when the seats are in the lounge position.
Operating Positions
To slide the seat forward:
1. Lift the forward seat at point (A).
2. Push down on the forward seat at point (B) and pull the seat forward.
3.
Lock the forward seat into the desired position by pushing down at point (A).
4. Lift the aft seat at point (C).
5. Push down on the aft seat at point (D) and push the seat forward until the
aft seat back is flush against the forward seat back.
6. Lock the aft seat into position by pushing down at point (C).
To slide the seat aft, repeat the steps above, but start with the aft seat.
Lounge positions
To adjust into the flat lounge position:
1. Lift the forward seat at point (A).
2. Push down on the forward seat at point (B) and
pull the seat forward until the seat back and bottom
are flat.
3. Lift the aft seat at point (C).
4. Push down on the aft seat at point (D) and pull the
seat aft until the seat back and bottom are flat.
To adjust into the chaise lounge position:
1. Lift up on the forward or aft seat bottom at point
(A or C) and push the seat bottom down into the
locked position.
2. To lower the seat bottom, lift the seat at point (A or
C). Drop the seat bottom flat while holding the seat
down at point (E).
To return the seats to the operating position:
1. Lift the seat backs at point (F) and push down on the back edge of the seat bottom (B) and then seat bottom (D).
2. Push the seat bottoms towards the center of the seat until the seat backs are flush against each other and locked
into place.
B
FORWARD
SEAT BASE
SEAT BOTTOM SEAT BACK
C A
D
OPERATING POSITIONS
SEAT BASE
SEAT BOTTOM SEAT BACK
C
A
B
E F
FORWARD
SEAT BASE
SEAT BOTTOM SEAT BACK
C A
D
LOUNGE POSITIONS