MaxTronic Sivy SA-3340S, Hardware User Manual

Page: 20 / 34

10
SA-3340S Serial ATA Disk Array Systems
2
Ba
sic Co
nfigu
ra
tio
n –
M
a
king
Con
nection
s
Making Connections
After the required number of disks have been installed, external connections to the disk array
system must be made. This section describes how to make all of the necessary connections.
Connecting the Host Interface
The disk array system has dual SCSI interfaces. Refer to the following sections to make host
interface connections.
Small Computer Systems Interface
The SA-3340S has dual Ultra320 SCSI interfaces. Follow these instructions to make connec-
tions.
1
Connect the active SCSI terminator to the bottom connector of the SA-3340S host port 2
(Secondary SCSI channel) at the rear of the disk array system.
2
Connect the Ultra320 SCSI cable to the top connector of the SA-3340S host port 2
(Secondry SCSI channel) at the rear of the disk array system.