Maxtro MK-8008BT User Manual Download Page 7

FCC Statement 

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to part 15 of the FCC rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference   
to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the 
following measures: 
-Reorient or relocate the receiving antenna. 
-Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected. 
-Consult the dealer or an experienced radio/TV technician for help. 
To assure continued compliance, any changes or modifications not expressly 
approved by the party responsible for compliance could void the user’s authority to 
operate this equipment. (Example- use only shielded interface cables when connecting 
to computer or peripheral devices). 
 

FCC Radiation Exposure Statement       

This equipment complies with FCC RF radiation exposure limits set forth for an 
uncontrolled environment. This transmitter must not be co-located or operating in 
conjunction with any other antenna or transmitter. 
This equipment complies with Part 15 of the FCC Rules.Operation is subject to the 
following two conditions:     
(1) This device may not cause harmful interference, and     
(2) This device must accept any interference received, including interference that may 
cause undesired operation.     

Caution!  

The manufacturer is not responsible for any radio or TV interference caused by 
unauthorized modifications to this equipment. Such modifications could void the user 
authority to operate the equipment. 
 

Summary of Contents for MK-8008BT








Reviews: