Maxtrack MXT141, Manual

Page: 22 / 34

22
Manual MXT141
Change GPRS Setup ­ Code 2
Parameters:
Parameter Value
Communication Protocol 0 – UDP, 1 – TCP
APN APN address from Provider
User GPRS User from Provider
Password GPRS Password from Provider
Primary IP Address Primary’s IP server address
Primary IP Port Primary’s IP server port
Secondary IP Address Secondary’s IP server address
Secondary IP Port Secondary’s IP server port
Table 5: SMS > Change GPRS Setup
Example: SMS message to change GPRS setup.
0000,6000001,2,1,tim.com.br,tim,tim,200.251.188.130,3232,200.251.188.131,2323 .
Change SMS Setup – Code 3
Parameters:
Parameter Value
Alias Name Name in SMS header to identify the sender of message
Destination Number Phone number of SMS receiver
Allow Number Mode
0 – Receives commands from any phone number
1 – Receives commands only from Destination Number
Send Packet Mode
0 – Device will not send position packets
1 – Device will send position packets only when no GPRS connection
2 – Device will send position packets each transmission interval setted
Table 6: SMS > Change SMS Setup
Example: SMS message to change SMS setup.
0000,6000001,3,MXT 140,03198765432,1,1 .