Installation
Maxtor MaXLine Plus II 250GB AT
3-5
3.3
HARDWARE OPTIONS
3.3.1
ATA Interface Connector
The configuration of a MaXLine Plus II 250GB AT hard disk drive depends on the
host system in which it is to be installed. This section describes the hardware options
that you must take into account prior to installation.
Figure 3-4
Jumper Locations on the ATA Interface Connector
Pin 40
ATA Interface Connector
Power
Connector
Pin 1
+12VDC
+5VDC return
+12VDC return
+5VDC
DS
CS
CLJ
DS
CS
CLJ
DS
CS
CLJ
DS
CS
CLJ
Cable Select
Setting (default)
Master Setting
Slave Setting
DS with CS for
slaves not
supporting DASP
Note: this setting is identical
for both drive 0 and drive 1