MAXTEK BH590, User Manual, Page: 8 / 12

Charging & Indicators
Charging the headphones
Plug the micro USB cable into the charge port. It take approximately
4 hours to fully charge. When the battery is full, the LED light tuns
blue. Only charge the headphone when they are turned off.
Please note:
On the first time charging the battery, please ensure the battery has been fully
charged before use.
LED indicators
LED off Power off
LED blue Power on
LED flashing blue/red Pairing mode
LED red Low battery
LED flashing red Battery almost drained
LED flashing blue Battery recharging
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
enquiries@quesh.co.uk
6
Care & Maintenance
Headphones Maintenance
• Re-charge your headset once every three months when it is not in
• use to keep the battery in good condition.
• If you do not use the headset for a long time. You have to charge
• the battery for 30 minutes and the Red LED lights up.
• Do not wash the headset with harsh chemicals, soaps or
• detergents
• For extended storage, first fully charge the battery till the LED turns
• blue.
• This product is not waterproof.
• Do not store the headset in high temperature environments
• including intense sunlight heat or naked flames.