MaxTech XT4862 User Manual Download Page 9

8

address provided by the technician when you call. We recommend
that the unit be insured.

This warranty is valid for products sold in North America only. Contact your
local authorized distributor or dealer for the warranty offered in other areas.

All warranty services must be performed by Authorized Service Centers.
There are no user serviceable parts inside the unit. Do not remove any
components or attempt to service the unit by any unauthorized service
center. This warranty is voided if the product has been abused, misused,
modified, or repaired by an unauthorized service center.

LIMITATION OF IMPLIED WARRANTIES
All implied warranties, including warranties of merchantability and fitness
for a particular purpose, are limited in duration to the length of this warranty.

EXCLUSION OF DAMAGES
MaxTech's liability for any defective product is limited to the repair or
replacement of the product, at our option. MaxTech shall not be liable for:

1. Damage to other property caused by any defects in this product,

damages based upon inconvenience, loss of use of the product, loss
of time, commercial loss; or

2. Any other damages, whether incidental, consequential or otherwise.

Some states do not allow limitations on how long an implied warranty lasts
and/or do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations and exclusions may not apply to you.

HOW STATE LAW RELATES TO THE WARRANTY
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.

Appendix D - Notices

FCC Class B Statement

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and can
radiate radio frequency energy, and if not installed and used in accordance
with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Summary of Contents for XT4862











Reviews: