Maxspect Turbine Duo TD-12K, Owner'S Manual

Page: 18 / 156

16
Maintenance Instructions
System Setup
System Setup features a set of functions allowing you to do perform maintenance on the
appliance.
To enter the System Setup page, first turn off the appliance, then press and hold
control dial
while turning the appliance back on. Keep on holding the control dial until the system setup
page is shown on OLED monitor.
There are 5 functions in the System Setup screen.
1. Firmware
2. Restore
3. Reset
4. Test Mode
5. Model Number
6. Exit
1. Firmware
This function allows you to update the firmware.
1. Rotate to select “Firmware”.
2. Press to begin the firmware update.
1. When there is no micro SD card or invalid firmware in the
micro SD card, “NO SD Card” or “Wrong File” will be
shown on the screen.
2. Otherwise the firmware update progress will be shown.
Once the firmware has been updated successfully, the
appliance will restart automatically and the new firmware
version number will be shown on the screen.
English