Maxspect Recurve R6-060, Owner'S Manual

Page: 10 / 133

7
Manual Mode

Press the control dial to enter the setting.

Press the control dial again to switch between the channels.

Rotate the control dial to set the brightness for each LED
channel.

Press and hold the control dial for 3s to save the setting and
exit the page.
Automatic Mode

Press the control dial to enter the setting.

Rotate the control dial to switch between the settings.

Press and hold the control dial for 3s to save the setting and
exit the page.
Within Automatic Mode, there are 3 settings for user to select
:
System Clock
: A clock set to be matched with users’ local time.
Program : Program the photoperiod to set specific brightness for each LED channel during
different time of the day.
Preset : 4 preset settings are available for user to choose from. (Refer to p.16)
P1: SPS dominated tank. P2: SPS/LPS mixed tank.
P3: Soft Coral/LPS mixed tank. P4: SPS dominated tank with a different
dawn/dusk time with moon light.
Setting the clock

Press the control dial to enter the setting page and then
select “System Clock”.

Press the control dial to switch between hour and minute.

Rotate the contr ol dial to set the time.

Press and hold the control dial for 3s to save the setting and
exit the page.
Operating Instructions
English