background image

MADE IN CHINA

6

v13.1

©2013 MAXSA Innovations, LLC

MAXSA Innovations, LLC

8412 Cathedral Forest Drive

Fairfax Station, Va 22039

Tel: 703-495-0661

www.maxsainnovations.com

[email protected]

Please save these instructions for future reference.

REPLACING THE BATTERIES:

When the charging ability of the batteries decreases, you can replace the batteries with 3 new AA 

rechargeable batteries. Follow the steps below when replacing the battery.

1. 

First push the power button to turn the light off.

2. 

Remove the Solar Powered LED Security Spotlight from its mounted back.

3. 

Remove the four screws at the back of the Security Spotlight and remove the back cover

4. 

Carefully remove the old batteries from the battery tray by hand and replace with three (3) new 

AA Ni-MH 1.2V rechargeable batteries.  Ensure that the new batteries are inserted in the correct 

+/- polarity orientation as indicated in the battery compartment. (WARNING: Installing the batteries 

in the opposite direction could damage the unit.)

5. 

Replace the back cover onto the Security Spotlight using the four screws.

6. 

Slide the light back into the mounted back.

7. 

Repeat the steps in the “Before first time use of your Solar Security Light” section on page 3 to 

ensure your new batteries are fully charged.

NOTE:  DO  NOT  DISPOSE  OF  BATTERIES  IN  GENERAL  HOUSEHOLD  TRASH  OR  INTO  A 

FIRE SINCE THE BATTERIES MAY EXPLODE. CONSULT YOUR LOCAL REGULATIONS FOR 

CORRECT DISPOSAL OF BATTERIES. THE BATTERIES MAY ALSO BE RETURNED TO MAXSA 

INNOVATIONS AT 8412 CATHEDRAL FOREST DR., FAIRFAX STATION, VA 22039. DO NOT TAKE 

APART THE BATTERIES SINCE THEY CONTAIN CORROSIVE CHEMICALS.

EXTENSION CORDS:

A 15-foot extension cord is available for this product for $14.95 (includes shipping and handling). This 

extension cord allows the solar panel to be placed higher or further away from the security light to ensure 

maximum direct sunlight exposure. For more information, please call 703-495-0661.

ONE YEAR LIMITED WARRANTY

MAXSA Innovations, LLC warrants to the original consumer/purchaser that this product shall be free of defects in material and 

workmanship under normal use and circumstances for a period of one (1) year from the date of original purchase for use.  When the 

original consumer/purchaser returns the product pre-paid (consumer pays return shipping) to MAXSA Innovations, LLC, 8412 Cathedral 

Forest Dr; Fairfax Station, VA 22039; USA within the warranty period, and if the product is defective, MAXSA Innovations, LLC will at its 

option repair or replace such. This warranty shall constitute the sole liability of MAXSA Innovations, LLC concerning the product.  MAXSA 

Innovations, LLC expressly disclaims all other warranties INCLUDING, WITHOUT LIMITATION, THE WARRANTIES OF MERCHANT 

ABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  NO PERSON, FIRM, OR COPORATION IS AUTHORIZED TO ASSUME 

FOR MAXSA Innovations, LLC ANY OTHER LIABILITY IN CONNECTION WITH THE SALE AND USE OF THE PRODUCT. MAXSA 

Innovations, LLC and agents and distributors will bear no liability whatsoever for incidental or consequential damages or charges of any 

kind.  Some states do not allow the reclusion or limitation of incidental or consequential damages, so the above disclaimer regarding 

incidental or consequential damages may not apply to you.  This warranty is void if the product has been damaged or tampered with 

or if the product or any such parts have been opened.  In all cases of damage during shipment, a claim must be filed with the shipping 

carrier and not with MAXSA Innovations, LLC. This warranty gives you specific legal rights; you may also have other rights which vary 

from state to state.

Reviews: