Once you have identified all parts, connect the solar
panel to your Solar Flood Light by plugging the 15
foot cord into the cord attached to the bottom of the
Solar Flood Light. Firmly turn and twist the cords
while pressing together for a tight connection.
Charge the batteries without activating the unit. Turn the power switch on the main
body of your Solar Flood Light to the OFF position.
3. Use the two wood/sheet metal screws supplied to mount the solar panel onto a
solid surface. You can adjust the angle of the solar panel by gently rotating it to a
different locking position.
Remember to set the panel to face direct
sunlight exposure, optimally towards the south.
Mounting handle
HOW TO INSTALL YOUR SOLAR FLOOD LIGHT
1. Remove the mounting handle from your Solar Flood Light by taking out the
two screws on the left and right sides of the main body.
2. Take the other two screws supplied with this product and install the mounting
handle onto a solid surface. Put the mounting handle and the main body back
together by using the two screws taken out in Step 1.
BEFORE THE FIRST TIME USE OF YOUR SOLAR FLOOD LIGHT
Brightness
control switch
Photosensor
ON
the
2
2
Leave the switch in this position for 3 days while the solar panel is in direct sunlight.
This will ensure that the batteries in your Solar Flood Light have a full charge prior
to normal operation.
