Marble Cutter MPMC1200/110 User Manual
4
source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached
to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool
will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTION FOR MARBLE CUTTER
Caution and use
1.
Unplug from the power outlet before performing any kind of adjustment, change of accessory or storing
the tool. These preventive safety measures reduce the risks of electrical shocks and of turning the tool on
by accident;
2.
Do not overload your tool, use it only for the adequate purpose. The correct power tool will do the job in
a better and safer way. Using the power tools for purposes that are different from what is indicated in the
manual might lead to hazardous situations;
3.
Perform maintenance on your power tool. Check if the moving parts are misaligned, bent or
broken, or if they bear any condition that might affect the correct operation of the machine. In case of
finding an abnormality that can’t be solved, or if in doubt, have the tool serviced before using it again.
Many accidents are caused by lack of correct maintenance of power tools;
4.
Keep the cutting tools sharp and clean. The proper maintenance of the tool’s cutting edges prevents
them from bending and improves handling.
5.
Keep hands away from the cutting blade and the cutting area, never put your hands under the
workpiece, because the cutting blade might cause serious injuries.
GB
Summary of Contents for 111-0800
Page 77: ...www krebs tools com ...
