MaxPro PROFESSIONAL MPBCO355, Manual

Page: 10 / 87

6 GB
are not intended for this machine and can create loss of control during use.
• This tool and abrasive wheel are not intended to cut wood or wood products. Abrasive wheels cut by
grinding or fretting while in work piece with the embedded grit in the wheel, these grits may grab wood
and cause loss of control or could cause the wood to burn due to friction heating.
• Do not set or mount the tool on a flammable surface or use the abrasive cut off machine near flammable
materials. During operation the wheel ejects sparks and hot chips from grinding on the workpiece, these
sparks could ignite flammable materials.
• Never cut or attempt to cut magnesium with this tool. The dust generated when cutting magnesium is
highly flammable and may be explosive under certain conditions.
• Avoid overloading the motor and prevent burn-out especially when cutting large cross sectional
pieces, apply light pressure on the handle during cutting. If any sign of smoke is evident at the air vents,
immediately discontinue the use of the tool. Electric shock is possible if motor is overloaded and burns out.
• Regularly clean the tool’s air vents by compressed air. Excessive accumulation of powdered metal inside
the motor housing may cause electrical failures.
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonryproducts
• Arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending
on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
• Abrasive Cut Off Wheels must have a maximum safe operating speed greater than the “no load RPM”
marked on the tool’s nameplate. Wheels running over the rated speed can fly apart and cause injury.
• Keep hands away from cutting area and wheel. NEVER place your hand behind the wheel. Do not attempt
to remove cut material when wheel is moving. Contact with the spinning wheel may cause serious personal
injury.
OPERATING INSTRUCTION
01 Handle
02 Upper guard
03 ON/OFF Switch trigger
04 Lock ON button
05 Movable guard
06 Vice
07 Quick spanner
08 Vice handle
09 Fence
10 Cut off disc
11 Spindle lock
12 Rubber feet
13 Motor with external carbon brush holder
14 Spark dust chute Assembly
15 Transport lock button
16 Base
17 Depth limiter