Figure 1-14
Figure 1-15
A single screen system
9) In the case of a single-display system, you may now proceed to the Powering-up Your MaxPac
.
A dual screen system
10) If you have a dual-screen system, press down on the release catch located at the lower left-hand
side of the system (Figure 1-15).
11) While continuing to press down on the release catch, pull the second screen away from the
system (Figure 1-16). Unfold this second screen completely as shown in Figure 1-17.
Figure 1-16
Figure 1-17
Note:
You may hear a squeaking noise when you unfold the second screen. This is caused by
the polyurethane clutch and is part of the friction mechanism that holds the screen steady. Do
NOT apply any lubricants to this mechanism, because they may degrade the polyurethane.
