7
Scanning and Dwell Time
- If during scan, your radio receives a call from another radio (e.g.
Channel 2), the scanning will cease for 3 seconds after the call is completed. This 3 second period
is referred to as “Dwell Time”. If during that 3 second Dwell Time, you wish to speak with that
user; you can press PTT and communicate with that user on channel 2. If you do not press PTT
within the 3 second Dwell Time, the radio will resume scanning.
Scanning and Home Channel
- when you enable scan, the channel that is shown on the display
will be designated as the Home Channel. The Home Channel is the channel that the radio will
transmit on when you press PTT and the radio is not in the 3 second Dwell Time as noted above.
(Example: If the radio is on channel 10 and scan is enabled; channel 10 will be the designated
Home Channel. Simply press PTT while the radio is scanning and the radio will transmit on
channel 10).
To disable scan, press Menu (P) button.
Additional scanning features are available through programming software. Contact Maxon or an
Authorized Maxon Dealer for additional information.
▶
5.4 Beep Tone On/Off selection:
Press Menu (P) button for more than 1 second and the radio will enter into function setting mode.
Press Menu (P) button 3 times. Radio will go to Beep tone on/off setup mode.
By Pressing UP (
▲
) or DOWN (
▼
) button, set Beep tone on or off. Press Enter ( ) button to
confirm. To exit from menu, press M button or PTT button.
▶
5.5 DTMF tone selection:
Press Menu (P) button for more than 1 second and the radio will enter into function setting mode.
Press Menu (P) button 4 times. Radio will go to DTMF setting mode. By pressing UP (
▲
) or
DOWN (
▼
) button, and pressing Enter ( ) button, you can select 10 different DTMF tones.
To exit from menu, press M button or PTT button.
▶
5.6 Call tone selection (10 different call tones):
Press Menu (P) button for more than 1 second and the radio will enter into function setting mode.
Press Menu (P) button 5 times. Radio will go to Call tone selection mode. By presssing UP (
▲
)
or DOWN (
▼
) button, and pressing Enter ( ) button, you can select On or Off.
If you select On and press Enter ( ) button, you can select 10 differenct Call tones by pressing
UP (
▲
) or DOWN (
▼
) button. To confirm your setting, please Enter ( ) button. To exit from
menu, press M button or PTT button.
To enable Call, press Call/Enter( ) button.
** Reminder : To receive Call tone, the receiving radio needs to be on the same channel and tone
settings.
To exit from menu, press M button or PTT button.