9
Priority Channel Edit: Only one priority channel can be programmed into the radio. To edit a priority channel, turn radio off, press
and hold scan button, first button beneath the PTT button. While holding scan button turn radio on, release the scan button after the
second red flash of the LED and PE is shown in the display. Upon release of the scan button the first channel number will be
displayed. If displayed channel is not your desired channel to be the priority channel press and release the
▲
or
▼
buttons to select
the desired channel to become the priority channel. After you have selected the desired channel if the channel number is flashing that
channel is already selected as the priority channel. If channel number is solid that channel is not selected as the priority channel. To
add or delete the selected channel as the priority channel press and release the monitor button, second button located beneath the PTT
button. The selected channel will flash if selected channel was added as a priority or the selected channel will be solid if the selected
channel was deleted as the priority. Upon completion of adding or deleting the priority channel press and release the scan button,
first button located below the PTT button., your new priority channel should be entered at this time.
Licensing and Service Information
FCC Licensing
The Federal Communications Commission requires that the operator of this radio be properly licensed under the applicable Part
and/or Parts of the FCC Rules and Regulations.
Consult with your Maxon Dealer, or contact the nearest FCC Field Office for information about obtaining a license.
Service
Do not tamper with internal adjustments. Damage to the equipment and/or improper operation may result. There are no user
serviceable items inside the radio.
It is recommended that you return your radio to a qualified Maxon Dealer for any service or repairs.
Recycling/Disposal of Batteries
The U.S. Environmental Protection Agency (EPA) classifies used Ni-Cd batteries as hazardous waste, unless certain exemptions
apply.
The battery should be recycled at the end of its useful life. Under various state or local laws, such batteries must be recycled or
disposed of properly and cannot be dumped in landfills or incinerators.
Maxon America, Inc. fully endorses and encourages the recycling of Ni-Cd batteries. A national program to collect and recycle used
Ni-Cd batteries is being implemented by the Rechargeable Battery Recycling Corporation (RBRC Ö). This program is being funded
through the use of license fees paid by the battery and product manufacturers to place the RBRCÖ Seal on the batteries.
The following is a list of facilities where the batteries can be shipped to be recycled. Contact these facilities for proper packaging and
shipping guidelines.
Software Copyrights
The Maxon products described in this operating instruction manual may include copyrighted Maxon software programs stored in
semi-conductor memories or other media. Laws in the United States and other countries preserve for Maxon certain exclusive rights
for copy-righted software programs, including the exclusive right to copy or reproduce in any form the copyrighted software program.
Accordingly, the copyrighted Maxon software programs contained in the Maxon products described in this operating instruction
manual may not be copied or reproduced without the express written permission of Maxon. Furthermore, the purchase of Maxon
products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights,
patents or patent applications of Maxon, except for normal non-exclusive royalty free license to use that arises by operation of law in
the sale of a product.
