Maxon SP-120 Series Operating Instructions Manual Download Page 18

Limited Warranty

Maxon America, Inc. ("Maxon") warrants the Maxon Product

manufactured by it against defects in material and workmanship

under normal use and service for a period of two (2) years from the

date of delivery to the original end user, provided that the user has

complied with the requirements stated herein. This warranty is not

assignable or transferable. Maxon is not responsible for any ancillary

equipment which is attached or used in connection with this product.

Maxon shall have no obligation to make repairs or to cause replace-

ment required which result from normal wear and tear or necessitated

in whole or in part by catastrophe, fault or negligence of the user,

improper or unauthorized alterations, repairs to the Product, use of

the Product in a manner for which it was not designed, or by causes

external to the Product. This warranty is void if the serial number is

altered, defaced or removed.

Maxon's sole obligation hereunder shall be to repair or replace the

Product covered in the above warranty.

To receive warranty service, deliver or send the Product, transportation

and insurance prepaid, to the place of purchase along with your proof

of purchase. Alternatively, call 1-800-821-7848 for other locations or

authorization to return the product directly to Maxon.

THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU

OF ALL OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED

OR STATUTORY, INCLUDING, WITHOUT LIMITATION, ANY

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE.
FOR ANY PRODUCT WHICH DOES NOT COMPLY WITH THE

WARRANTY SPECIFIED, THE SOLE REMEDY WILL BE REPAIR OR

REPLACEMENT. IN NO EVENT WILL MAXON BE LIABLE TO THE

BUYER OR ITS CUSTOMERS FOR ANY DAMAGES, INCLUDING

ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL

DAMAGES, OR FOR THE LOSS OF PROFIT, REVENUE OR DATA

ARISING OUT OF THE USE OF OR THE INABILITY TO USE THE

PRODUCT.

This warranty is void for sales and deliveries outside of the United States.

16

Summary of Contents for SP-120 Series




















Reviews: