Maxon SM2102 User Manual Download Page 4

 

2. Introduction 

Thank you for purchasing the Maxon PM Mobile range 

The SM2102 mobile radios are packed full of sophisticated user and system features 

which allow the radios to be tailored to meet the requirements of most radio networks 

today. 

All the features described are made available thanks to the latest reliable, but functionally 

rich, software that controls each SM2102 mobile. This means that all features described 

are available without the need to fit expensive and time consuming option boards. 

Most of the features or options described are activated in the radio as programmable 

parameters; please contact your dealer for full details on these options.   

The SM2102 is a DTMF, SECALL and SMS mobile radio with 208-channel capability. 

The radio is programmable for output power, channel spacing, and a range of features. 

The three buttons located on the bottom left-hand side of the radio under the LCD, are 

described as programmable. These three buttons (P1, P2, and P3) have a short and long 

press and can be used for various pre- programmed features, Monitor, Power H/L, Scan, 

DTMF, Key lock, Selcall, Scan, Public Address, Open Close, 1200/2400, SMS and Light. 

The range does conform to R+TTE Directive. The unit has been designed to IP54 and 

meets the R+TTE Directive ETS 300.086 2001. 

 

 

 

      3. Preparing for use 

Unpacking and Inspection 

Unpack the radio and check that you have received the following items: 

SM2102 Mobile Radio 

Mounting Kit 

Standard Microphone 

Inspect all items   

If any of these items are missing, please contact your Dealer. 

 

 
 

4. Front Panel description 
 

Note:

 the numbers below refer to the illustration on the inside cover 

1. MICROPHONE SOCKET         

Connect the supplied microphone or optional DTMF/Heavy Duty microphone. 

NEVER

 connect non-specified microphones the pin assignments may be different and 

the transceiver may be damaged. 

 

Summary of Contents for SM2102













Reviews: