Antenna Installation
Fasten the antenna to the radio by turning the antenna clockwise
into the receptacle on top of the radio.
Battery Pack Removal / Belt Clip Installation
The battery must be removed from the radio body to install the belt
clip. Remove the slide-on battery pack by placing your thumb under
the latch on the side of the radio (A). Lift upward while sliding
battery away from your thumb (B). Insert top portion of belt clip into
recessed hole located on rear top of radio body (C). Position bottom
of belt clip against radio back (D). Re-install battery by aligning
"rails" on battery with radio body and sliding firmly toward latch side
of radio (E). Once the battery is installed, the belt clip cannot be
removed without again removing the battery pack.
7
