________________________________________________________________________
11535 West 83
rd
Terrace ▪ Lenexa, Kansas ▪ 62114
Telephone: 913-859-9515 ▪ Fax: 913-859-9550
Website:
SD-170EX Series Repeater Cable
Purpose: To create a simple 5W repeater using two data radios.
Date: 6-27-13
Cable Connectors are DE9 female
Programming & Features
1.
Programming for both radios should be the same in the event of a radio failure. It
may be possible to hot-swap the radios in the field.
2.
“TX Tone Generation for Data Input” should be turned “on”.
3.
Time out timer can be set from 10s to 990s.
4.
High/Low TX power. 5W or 1W.
5.
CTCSS or DCS signaling.
6.
V2, U1, and U2 bands available.
7.
Narrow band or standard band operation.
Tuning
1.
Adjust Speaker Out (pin 9) on the RX radio to 640mVRMS using a 1 kHz tone
@ 1.5 kHz deviation; narrow band. Newer radios are missing R424 (10K)
resistor. For optimum performance this resistor should be added. If not,
Speaker Out should be lowered to 500mVRMS.
