SCALE 0.500
SCALE 0.500
SCALE 0.500
IMPORTANT:
Friction bushings must be positioned with
flat sides oriented as shown in the illustration below.
NOTE:
Over-tightening screws may cause screws to strip.
Do not over-tighten screws.
Step 2 - Slide Hinge Bushing over Hinge Tube.
Step 1 -Use Connector Bolts to attach
the Base Support Assembly
to the Column Leg
Step 3 - Place Hinge Bracket over boss on Hinge Bushing.
Line up the Hinge Bracket with the pilot holes
outlined with ovals on page one
and attach with wood screws.
Step 4 - Line up the Latch Assembly with the pilot holes
outlined with triangles on page one and attach
with wood screws.
Step 5 - Pull back on the
Latch Assembly
to expose two
holes and attach
with wood
screws.
Illustration 1.
Prepare Nesting Tables
Installation Packet
343-4085
(03/17)
Page 2 of 3
