Maxon IDX 56, User Manual

Page: 34 / 54

Electrical Installation
Connections
IDX 56 User Manual
4-34
mmag | 2020-04 | rel9398
4.3.5 Supply (X4)
Holding break supply voltage
With the optionally available holding break, the minimal power supply voltage must be at least 24 VDC.
Figure 4-19 Power connector X4
Table 4-25 Power connector X4 – Specification
Table 4-26 Power connector X4 – Pin assignment
For suitable prefab cable assemblies see  Table 4-9 on page 4-25.
Continued on next page.
Power connector X4
Type M12, male, 5 poles, L-coded
X4
Head A
Prefab
cable
Signal Description
Pin Color
1 brown
+V
CC
Power supply voltage (+12…+48 VDC)
2 white
+V
C
Logic supply voltage (+12…+48 VDC)
3 blue GND Power ground
4 black
+V
I/O
I/O supply voltage (+20…+30 VDC)
5 gray FE Functional earth