Maxon GPC X1-LDF, Installation Manual

Page: 61 / 76

Adjusting the liftgate
55
5.6 Adjusting the stopper for fastening the platform
The stopper fastens the right-hand foldover section of the closed platform and keeps
the platform from hitting the vehicle while driving.
IMPORTANT: Make the adjustment with the platform folded and closed (driving
position).

Loosen the nuts (1) and bolts (2) on the stopper (3).

Press the stopper (3) firmly against the plastic disk (4) (see Fig. 85).
Leg
end:
Item
1
Hex
agon
nut
Item
2
Scre
w
Item
3
Stopper
Item 4 Plastic disk

Tighten the nuts (1) and bolts (2) on the
stopper (3) to a torque of 80 Nm
(see Fig. 86).
5.7 Adjusting the support arm for
the driving position using the
Bowden cable
Fig. 85
Fig. 86