Antenna Installation
Attach the antenna by turning clockwise into the antenna receptacle
on top of the radio.
Attaching and Removing the Belt Clip
To attach the belt clip to the radio's battery pack,
hold the clip
and slide it into the recessed area at the top of the pack. A click will
verify the clip is securely positioned.
To remove the clip,
press and
hold the release tab toward the clip while gently pulling the belt
clip assembly off the radio.
GMRS-50 Series Operations
Power On - Volume - Power Off
Turn the radio on by rotating the on /off - volume control clockwise
until you hear a click and a single tone. Increase the radio volume
by continuing the clockwise rotation. To turn the radio off when you
have finished transmitting, receiving, etc., rotate the control counter-
clockwise to detent.
To Transmit
CAUTION
OPERATION OF THE TRANSMITTER WITHOUT
A PROPER ANTENNA INSTALLED MAY RESULT IN
PERMANENT DAMAGE TO THE RADIO
NOTE:
FCC Rules and Regulations require that you monitor a
channel for activity before transmitting.
Press the monitor button to monitor the channel for activity. To
avoid interrupting another user, make sure the channel is clear
before you begin transmitting.
The tri-color LED located on the top panel can help with channel
monitoring. It will glow amber if RF activity is present; or green if
the transmission has a CTCSS tone that matches a tone programmed
6
