About
About this Document
ESCON Module 50/4 EC-S Hardware Reference
1-6
CCMC | 2021-08 | rel9026
1.1.4
Symbols & signs
In the course of the present document, the following symbols and signs will be used.
Table 1-2
Symbols & Signs
1.1.5
Trademarks and Brand Names
For easier legibility, registered brand names are listed below and will not be further tagged with their respec-
tive trademark. It must be understood that the brands (the list below is not necessarily concluding) are pro-
tected by copyright and/or other intellectual property rights even if their legal trademarks are omitted in the
later course of this document.
Table 1-3
Brand Names and Trademark Owners
Type
Symbol
Meaning
Safety Alert
(typical)
DANGER
Indicates an
imminent hazardous situation
.
If not avoided, it
will result in death or serious injury
.
WARNING
Indicates a
potential hazardous situation
.
If not avoided, it
may result in death or
serious injury
.
CAUTION
Indicates a
probably hazardous situation
or calls the
attention to unsafe practices. If not avoided, it
may
result in injury
.
Prohibited
Action
(typical)
Indicates a dangerous action. Hence,
you must not
!
Mandatory
Action
(typical)
Indicates a mandatory action. Hence,
you must
!
Information
Requirement /
Note / Remark
Indicates an activity you must perform prior
to continuing, or gives information on a particular item
you need to observe.
Best Practice
Indicates advice or a recommendation on the easiest
and best way to proceed.
Material
Damage
Indicates instructions on how to prevent damage to the
equipment.
Brand Name
Trademark Owner
Littelfuse®
SMD NANO2®
© Littelfuse, USA-Chicago, IL
Windows®
© Microsoft Corporation, USA-Redmond, WA
